How to Make Ramps

Up one category:
Tutorials

Introduction

There are two ways you can make ramps. You can either use a Hinge or a CFrame to edit rotation. There is also a way to use Wedges as what appears to be a ramp, if your looking for a ramp look, this is the best thing for you, it looks like a ramp, but acts like stairs.

Using a Hinge

• In Roblox studio, click Workspace.
• Click Insert > Object > Part
• Resize the newly brick so that it is one unit wide, one unit long, and as tall as you want.
• Click the Weld option in your Toolbar (it has an X in a square).
• Click ONE side of your tall brick with the weld option.
• Click Workspace.
• Click Insert > Object > Part
• Resize this newly created brick so it is one unit wide, one unit long, and one unit tall.
• Click the Weld option in your Toolbar.
• Click the side of this brick that is facing the welded side of the TALL brick with the weld option. You should have two welded faces facing each other.
• Select the Drag option in your Toolbar.
• Place the small brick near the top of the tall tower.
• Select the Hinge option on your Toolbar
• Click the small brick. A yellow dot should be protruding from it.
• Click Workspace.
• Click Insert > Object > Part
• Resize this newly created brick to a long, flat, rectangle.
• Drag this newly created rectangle so that you can't see the yellow dot.
• Test your game. If you did this correctly, your bar should fall downwards.

Using a CFrame

Make a brick, anchor it and name it "slope". Then open the Command Bar and type this in:

game.Workspace.slope.CFrame=CFrame.fromEulerAnglesXYZ(0,0,0)

Change the "(0,0,0)" to how many radians (not degrees) you want it to rotate. Instead of using degrees, they use radians, which are a different way of saying how big an angle is. You can use numbers between 1 and 0, which will work fine.

Play around with it, you can put the new number in either one of the three zeroes in the line, like this:

game.Workspace.slope.CFrame=CFrame.fromEulerAnglesXYZ(0.5,0.9,0.3)

Which will make it rotate in all kinds of directions. You can also press enter a couple of times and it will make the brick rotate again, so you can rotate it farther.

Also, you can use

brick.CFrame=CFrame.new(Vector3.new(0,100,0)) * CFrame.fromAxisAngle(Vector3.new(0,0,1), math.pi/2)

• Change the first CFrame.new(Vector3.new((x,y,z)) values to reflect the position of your brick.
• Change the second CFrame.fromAxisAngle(Vector3.new(x,y,z)) values to reflect which dimensions you are rotating. For example, if you want to rotate the brick around the z axis, use (Vector3.new(0,0,1)). If you want to rotate the brick around the y axis, use (Vector3.new(0,1,0)). If you want to rotate the brick around the x and z axis, use (Vector3.new(1,0,1)).
• Lastly, change math.pi/2 to the value in radians you wish to angle the brick by. This can be a constant, a variable, up to you.

Tips

Try math.pi, its equal to 180 degrees. Then, try multiplying or dividing it to get different angles.

See Also

Radians